Explosion-proof wine pump (self-priming pump) only maintenance, service life can be longer, below to talk about the protection of explosion-proof wine pump (self-priming pump) maintenance method

1, check the explosion-proof wine pump (self-priming pump) and the pipeline and the combination of loose phenomenon. Turn the explosion-proof wine pump with hand (self sucking pump). Add bearing lubricating oil into the bearing body. The lubricating oil should be replaced or supplemented in time. After 500 hours, the lubricating oil is replaced after 100 hours.

2. When the motor is opened, the inlet pressure meter and the imported vacuum pump are opened, when the explosion-proof wine pump (self sucking pump) is running normally. The gate valve is gradually opened after the proper pressure is displayed, and the load of the motor is checked at the same time. As far as possible to control the flow of explosion-proof wine pump (self-priming pump) and the scope of the lift on the sign. Ability to achieve maximum energy efficiency

3, the bearing temperature can not exceed the ambient temperature 35 degrees, the maximum temperature should not exceed 80 degrees

4. Explosion-proof wine pump (self-priming pump) is used in winter. The lower part of the pump drain plug unscrew medium net. To prevent cracking.

5, explosion-proof wine pump (self suction pump) temporary stop. To dry up the water, all the pumps should be removed. Put the rotating part and the joint into the grease and keep it properly.

• Print
• Close This Page
• Recommendation：
• 
• Browse：