IH type stainless steel chemical centrifugal pump overview:

IH stainless steel chemical centrifugal pump is a single-stage single suction cantilever centrifugal pump, the marks, performances and dimensions of the international standard ISO2858-1975 (E), has a wide range of performance, high efficiency, "three" level is high and the maintenance is convenient, the efficiency is 5% higher than the average F type pump, mechanical industry determined by the Ministry of energy, to replace the F type corrosion-resistant centrifugal pump replacement products. A liquid containing no solid particles that has a corrosive and viscosity like water.

The medium temperature of the IH type chemical centrifugal pump is from -20 C to 105 C. The dual end seal cooling device is used when required, and the temperature of the conveying medium is from 20 to +280 to +280. It is suitable for chemical, petroleum, metallurgy, power, papermaking, food, pharmaceutical, environmental protection, wastewater treatment and synthetic fiber industries to transport all kinds of corrosive or non polluting media similar to water.

The performance range of IH series chemical pump: stainless steel chemical pump

Flow Q:6.3 ~ 400m3/h lift H:5 ~ 132M

Speed n:2900, 1450r/min band power: 0.55 ~ 110KW

Inlet diameter: 50 ~ 200mm maximum working pressure: 1.6Mpa

IH series pump has 29 basic types, of which 22 double speed (2900, 1450r/min) after the A, B two types of impeller diameter cutting variant, up to 112 specifications.