Treatment of the rise of the bearing temperature of the wate
Author：tnbf Add Time：2018-01-30 11:11:26
(1) cause of high temperature failure of lubricating oil
(2) the inlet of the bearing box, the emulsification and deterioration of the lubricating oil
(3) there are impurities in the bearing box
(4) excessive pump load
(5) the gap between the balance plate of the multistage pump is too large
processing method
(1) replacement of lubricating oil in the bearing chamber
(2) multiple flush bearing boxes
(3) to reduce the load properly according to the technical index
(4) adjusting the clearance of the balance plate of the multistage pump to reduce the leakage
- Close This Page
- Recommendation：
- Browse：
On A：Advantages of stainless steel self-priming pump in low-level
Next：How to use metal protective layer to carry out anticorrosion
