The maintenance and maintenance of the heat conduction oil pump needs 10 respects.
1. after the use of vacuum oven, be sure to do a good job of cleaning, clean the glass window of the vacuum oven.
2. clean the surface antirust oil.
3. remove rust oil from the inner cavity of the governor and the inner cavity of the smooth and heat conduction oil pump, and take part in the smooth oil of the regular trademark.
4., the rust proof oil in the fuel pipeline should also be cleared before application. The fuel will be connected to the spray micro heat transfer oil pump pipeline, and it will migrate from time to time to change the spray heat conduction oil pump camshaft until the outlet valve seat is sprayed clean.
5. the selection of fuel is reasonable.
6. the use of appropriate labeling of fuel oil. Ordinary day with arthritis No. 0 diesel oil, winter use -10 light diesel oil.
7. the use of fuel must be clean and must not contain any impurities and moisture.
8. water will corrode the heat conduction oil pump, so the water containing material should stop using the heat conduction oil pump to vacuum. Please go to room 1210 and use the pump to vacuum.
9. material containing a large amount of solvent, please remove the solvent from the large part of the oven in the oven, and then use the stainless steel gear to heat the oil pump to vacuum.
According to the 10. order accurate use of vacuum pump, to avoid the phenomenon of reverse flow attack.
- Close This Page
- Recommendation：
- Browse：
