The main use of automatic mixing pump
1. wastewater from factories and businesses is seriously polluted.
2. drainage systems of municipal sewage treatment plants, hospitals and hotels.
3. sewage drainage station in the residential area.
4. water supply equipment for drainage station and waterworks.
5. municipal engineering and construction sites.
6. auxiliary equipment for exploration, mining and power plants.
7. biogas digesters in rural areas, farmland irrigation, dredginghetang.
main features
1. when the sewage pump runs, the sediment at the bottom of the pool will be agitated automatically to prevent the deposition of dirt, and no manual cleaning is necessary.
2. the unique design of the impeller, with the fiber, debris cut and tear function;
3. the external circulation cooling system is adopted to make the low water level of the sewage pump run, reduce the starting frequency of the motor and prolong the life of the motor.
4. national standard atlas recommended products;
5. Shanghai high tech achievements transformation products.
6. municipal engineering and construction sites.
7. auxiliary equipment for exploration, mining and power plants
8. biogas digesters in rural areas, irrigation, cleaning ponds
The main use of automatic mixing pump
Structural description
1, the unique double channel non blocking impeller structure is used to improve the flow capacity and discharge capacity of sewage dirt.
2, automatic stirring device, producing very strong stirring force, mixing the sediment in the pool into suspended matter and inhaling the impeller to reach the effect of clearing up the silt.
3, the clapboard divides the base into two, and the mixing and the water do not affect each other.
4. The mechanical seal is a double end mechanical seal. It is in the oil chamber for a long time to ensure the pump running safely and reliably.
5. The fluid dynamic seal of the auxiliary impeller structure has the auxiliary sealing effect, thus protecting the mechanical seal and balancing the axial force, so as to prolong the life of the bearing.
6, there is no leak detection probe in the pump connection chamber. When the leak occurs, the probe sends out a signal, and the control system protects the pump. The company can provide automatic safety protection control cabinet.
7, motor stator adopts B class and F class insulation, with thermal protector. When the motor is overheated and heated, the protector will act in time to ensure absolute protection for pump and motor.
8. The oil and water probe is installed in the oil room. When the mechanical seal is damaged, the water enters the oil chamber. The probe sends out signal to protect the pump by the control system.
9, JPWQ with internal circulation cooling system, can ensure the water pump at the lowest water level in the pool normal work.
- Close This Page
- Recommendation：
- Browse：
