In the work of the gear oil pump overheating is often the phenomenon, then how should we correctly handle this phenomenon?
First find out what cause of the gear oil pump heating, the possible factors have,
1, the viscosity of the conveyed medium is too large to cause overheating; if the viscosity is greater than 1500cSt, a high viscosity pump should be considered.
2. If it is a new pump, it is hard to rotate the connector, if it is rotated by hand.
3, consider whether or not it is related to environmental factors.
4. How much is the temperature of the medium? If the temperature is high, it is recommended to use the high temperature oil pump.
5, the too small adjustment of the gear oil pump in the assembly time gap may also lead to the heating of the gear oil pump, and the method is to disassemble the reassembly and adjust the gap.
6. Is there any air inhalation in the inlet of the pump?
7, whether the medium is corrosive, if there is a corrosion can be used to re select the stainless steel pump to transport;
- Close This Page
- Recommendation：
- Browse：
