Stainless steel Self-priming sewage pump is the engineering and technical personnel in the factory of foreign technology, combined with the actual situation of China's Electromechanical industry and the successful development of the new structure. Through the pump impeller and the pump body, can be like self-priming pump that does not need to install the valve, but also through the large particles and long fibers, with the application of the market and broad prospects for the development of.ZW type self-priming sewage pump, also known as solid-liquid pump or pump impurities. The series of hydraulic design of pump impeller is unique, shrinkage in the impeller chamber alone, connected with the impeller room is pressurized water chamber, when the impeller rotates, the liquid inside the pump produces violent axial vortex, making imports create a vacuum outlet head. Therefore impurities can be discharged from the water pressure chamber, so its passage is completely smooth, the effect of sewage is other Self-priming sewage pump. There is nothing comparable to this the unit production of ZW Self-priming sewage pump can be like a machine A self suction clear water pump did not need to install the valve, and the suction containing large particles of solid block, long fiber, sediment, mine waste contamination, waste treatment and sewage works all things. Self-priming sewage pump can be widely used in municipal sewage works, light industry, textile, papermaking, food, chemical industry, electric power, petroleum, mine and the pond aquaculture industry.
Characteristics of stainless steel self priming sewage pump
1. A double blade impeller structure has been adopted to greatly improve the ability to pass the dirt.
2, the mechanical seal adopts a new type of sassafras, and runs into the oil chamber for a long time.
3, the whole structure is compact, small volume, small dryness sound, obvious energy saving effect, convenient maintenance and convenient for user to replace.
4. The automatic control cabinet can automatically control the pump's super movement and stop according to the change of the required liquefaction. It is very convenient to use without a special person to watch the tube.
5. The installation method can be installed according to the needs of the user. It is very convenient for installation and maintenance.
6. It can be used in the range of design, and the motor will not be overloaded.
7. The pump is equipped with an outdoor motor, and the pump room is not built. It can be installed directly and outdoors to save the expenses.
Instructions for the use of self priming sewage pump for stainless steel
We check the pump base, couplings, bearings and other parts are firmly connected? If loose should be tightened.
The hand rotation coupling to whether there is abnormal sound?
The open water valve pump above, adding liquid storage water pump volume of not less than 2/3, close the valve. Two use without irrigation water.
The test power supply, from the motor side, turn clockwise (no inversion).
The start of work, to observe whether operation is normal or not? If there is abnormal, should find out the reasons, be excluded.
- Close This Page
- Recommendation：
- Browse：
