When using stainless steel IH chemical pump, consumers are often said, there are a few small problems often haunt them, affect their production activities, today, we will summarize them often and how to solve the problem of major knowledge is:
I. IH stainless steel chemical pump in operation but low flow.
1. Check whether the ball is stuck. If the supplied liquid does not match the valve ball material. The ball will swell up. Please replace the valve ball and seat with suitable material.
2. Check whether the pump body is free of plaques and adjust the inlet pressure of compressed air. Reduce the operating speed of the pump body to adjust the viscosity and the larger concentration of liquid;
3. Please check whether the inlet pipe is blocked; Stainless steel self-priming pump.
II. The liquid escapes from the outlet of the gas chamber.
1. Please check whether the diaphragm is broken;
2. Check whether the diaphragm is properly installed and locked;
III. There is a large amount of bubbles in the export liquid.
1. Please check whether the diaphragm is broken;
2. Check whether the pump body and pipeline are leaking.
Above is consumers often reflect to us about IH chemical pump of stainless steel, hope you can consult after seeing the above method to inspection on your device, to ensure better service to you.
- Close This Page
- Recommendation：
- Browse：
