The pressurized pump uses the low pressure gas (2, 8bar) of the large area piston to produce high pressure gas / liquid on the small area piston. It can be used to compress air and other gases, and the output pressure can be stepless by driving pressure. The gas pipeline booster pump has a single action pump and a double acting pump. The double acting pump gas piston compresses the gas in the two stroke cycles. When the driving gas is acting on the gas piston, the working piston can get a larger output flow with the gas driven. The supercharging pump has the following features: simple maintenance: the parts and seals of the booster pump are less, and the maintenance is simple and the cost is low together. High cost performance: the supercharged pump has the characteristics of high output performance and low cost. Strong adjustable: the output pressure and flow of the pressurized pump are accurately adjusted by the pressure regulating valve of the driving gas. Adjusting the driving pressure, the output pressure booster pump pressure pipeline precise adjustment between the pre pressure and maximum output pressure. The output pressure is high: the maximum working pressure of the pneumatic liquid pipeline booster pump can reach 700Mpa, and the maximum working pressure of the pneumatic gas pipeline booster pump can reach 300Mpa. Starch cyclone
Good material: the high pressure part of the pressurized pump is made of hard aluminum alloy. The high pressure plunger is made of stainless steel. And the double layer seal is used. The material of the key parts can be selected according to the medium. A variety of gas driven: compressed air, nitrogen, water vapor, and so on. The output flow is large: the pressurized pump of pneumatic pipe is only 0.2— 0.8Mpa is compressed air. The same series of pumps for all “ O” type rings, repair package vulnerable parts can be replaced each other, greatly reducing the cost of maintenance. There is no use of lubricants for the pressurized pump of the pneumatic pipe. The application is flexible: the supercharging pump is made from a simple manual to full automation, and the booster pump is suitable for various applications and is compatible with the customer's system. The air motors of most types of pumps in the same series are interchangeable. Automatic pressure keeping: when working, the pressurized pump works quickly and reciprocate, with the output pressure approaching the set pressure value, the reciprocating speed of the pump decreases until it stops. And maintain this pressure, at this time the energy consumption is very small, no heat generation, no part motion. When the pressure balance breaks the pressure pump, the pump starts to work automatically to the next balance.
- Close This Page
- Recommendation：
- Browse：
