1, before installing the pump, we should carefully check whether there are any hard objects (such as stone and iron particles) affecting the pump running in the pump channel, so as not to damage the impeller and pump body when the pump runs.
2, the anchor bolts must be tightened to avoid the effect of vibration on the performance of the pump when starting.
3. The weight of the pipeline should not be added to the pump when the centrifugal pump is installed. It should have its own supporting body so as not to affect the performance and life of the operation.
4, in order to maintain convenience and safety, install a regulating valve on the pump's inlet and outlet pipeline and install a pressure gauge near the pump outlet to ensure operation in the rated head and flow range, ensure the normal operation of the pump and increase the service life of the pump.
5, pump for suction occasions, should be equipped with bottom valve and inlet pipe should not be too many corners, and shall not have Water Leakage leakage phenomenon.
6. The discharge line, such as a reverse check valve, should be installed outside the gate valve.
7, chemical centrifugal pump installed after the installation of the pump shaft, the impeller should have friction or card death, otherwise the pump should be removed to check the cause.
8. The installation method of chemical centrifugal pump is divided into rigid connection and flexible connection installation.
9, the chemical centrifugal pump and the motor are the whole structure, without the need to find the correct installation, so it is very convenient to install.
- Close This Page
- Recommendation：
- Browse：
