The hydraulic end of mud pump accessories is mainly composed of valve box, cylinder liner, piston rod, suction pipe and discharge pipe. Its main function is to complete the suction and discharge of liquid. The Dongying Tianyuan Machinery Factory will come to you in detail about the hydraulic end device of mud pump accessories:

(1) valve box part: the valve box is mainly composed of valve box, valve body, valve seat, valve cover, cap, spring and so on. Its main function is to control the two processes of absorbing and discharging.

(2) top part include: the main part of the pump head (cylinder), rod, piston, cylinder liner, cylinder head, cylinder sleeve, top flange (He Shangtou), a gland, rod packing box and cylinder packing etc.. Its main effect is through the reciprocating movement of the piston in the cylinder sleeve, which directly completes the process of suction and discharge of the fluid.

(3) the suction pipe part is mainly composed of upper water filter, upper pipe and water four way. The main function is to form a dispensing channel for suction fluid, and filtrate the fluid to ensure the efficiency of the upper water.

(4) the discharge pipe part: mainly by the discharge tube three, the discharge pipe filter, the safety valve and the air bag and so on. Its main function is to form the flow channel of the discharge fluid, buffer and shock absorption, filter, stabilize the displacement and pressure, ensure the safety of the equipment and the body. Anhui Tian Tong Pump Valve Machinery Co., Ltd.

At the same time, in the drilling cycle is used in mud pump parts is surface washing medium - water, polymer mud or fluid under pressure through the high-pressure hose, faucet and drill string center hole bit sent straight at the bottom to cool the drill bit, will be cutting down debris cleared and transported to the surface the purpose of.

• Print
• Close This Page
• Recommendation：
• 
• Browse：