A brief discussion on the use of stainless steel submersible pump 6.

Stainless steel is the strongest in the metal materials, daily except stainless steel submersible pump, like what stainless steel POTS and pans, stainless steel and all kinds of metal materials, etc., are the most common things in daily life. Since want to adopt stainless steel, stainless steel submersible pump, of course, also have their own reason, because in some areas, like mine submersible pump, although power is great, but the ability to resist against is very small, can only meet on the other hand. What problems should stainless steel submersible pump pay attention to when use?

1. When working in a stainless steel submersible pump, it is necessary to pay attention to the water level drop, and the submersible pump shall not work outside the surface of the water.

2. When using, it is found that the submersible pump has been suspended, the water outlet is low, the noise and the thermal protector frequently jump, etc., the pump should be stopped in time.

3. Check whether the power supply voltage is too low or without power, and the cable is broken or missing.

4. Check whether there is card resistance or wear in the impeller, whether the outlet is silted, whether the head is too high or too low, whether the filter is blocked or not. If there is any problem, find the corresponding solution.

5. If the failure of the stator winding is broken, it shall be repaired by the maintenance unit. When reassembling, the sealing part shall be checked by air pressure.

6, if found damaged cable replaced immediately, just can use, such as stainless steel submersible pump used for pumping more viscous slurry after, the power should be kept in clean water for a few minutes, wash slurry pumps, dry coated with anti-rust oil, then stored in gout, dry place.

• Print
• Close This Page
• Recommendation：
• 
• Browse：