The anticorrosion and heat preservation of the pump plays an important role in the pump work. It is known that the delivery medium of the pump is mostly corrosive, and the medium temperature is different, the degree of corrosion is different, how to improve the anti-corrosion and insulation effect of the pump?
Corrosion is a primary issue of pump, in the process of the use of fluoride plastic pump will be carried out in accordance with the operating rules, it can improve the work efficiency and service life of pump, but also can effectively reduce the wrong operation of mechanical failure caused by leakage, leakage accident, reduce the equipment corrosion problems. Fluorine plastic itself has good corrosion resistance, as long as we do not pay attention to the damage, attention to environmental conditions.
There is also the protection of the ac transmission line induced corrosion, generally speaking, the corrosion of the alternating current is much smaller than the direct current, which is about 1% of the direct current. But when the high voltage transmission line and pipeline parallel erection, due to the effect of electrostatic field and alternating magnetic field on metal pipeline induction and produce alternating current, then the influence and harm of the pipes can not ignored, in the case of the results, the existence of the alternating current (ac) can cause depolarization effect on the surface of the electrode, the corrosion speed. In addition to avoiding or shortening the length of parallel segments as much as possible.
Insulation is also necessary, especially at low temperatures. If the equipment is a closed storage device, then the heat preservation shall be carried out for the transmission line and the valves of each connection. If it's open storage tank, then on the surrounding environment under effective control, remove combustible and explosive objects, best to heat up the surrounding the storage tank, ensure the media does not set.
- Close This Page
- Recommendation：
- Browse：
