Application: the self - suction pump is mainly used to deal with the transportation of some gas - containing materials. Therefore, it is widely used in the level of liquid level instability, even the liquid level is lower than the pump import of various occasions to absorb materials, and also used as the backhaul in the CIP system.
Specifications: 10T-30T, 2.2KW-7.5KW.
Material: SUS316L (material in the selection of pump body, pump cover, impeller and other parts of all contact with the material made by SUS316L stainless steel), a liquid sealing material for EPDM three EPDM
Standard: DIN, SMS
Impeller: open impeller, no health dead angle.
Shaft seal: the static ring of mechanical seal is made up of SUS316L steel embedded graphite, and the ring is made of silicon carbide.
Surface treatment: wetted parts polishing, the matte or sandblasting.
Maximum import pressure: 0.5MPa
Temperature range: -10° C to +140° C (EPDM)
Washable mechanical seal:
Water pressure: the highest 0.1MPa
Water: 0.25-0.5L/min
- Close This Page
- Recommendation：
- Browse：
