The pump is used widely in modern engineering unit price, then the general service life of the pump can be how long? How to prolong the service life of it? Now we will work together to learn about it.
NORPRENE tube and PHARMED tube have the longest service life in all kinds of applications. The practical results show that, when the rotational speed of 50 rpm, some dimensions of MASTERFLEXL/S? Tube service life can be more than 5000 hours.
High performance precision pump than conventional precision type pump service life increased by 20% to 30%.
NORPRENE/PHARMED pump in pressure applications, the longest service life.
Peroxide treatment silicone tubing will extend the service life 40%. Platinum silicone tubing has good chemical compatibility. The newly launched a durable type platinum silicone tubing extended 5 times more than the general platinum silicone tubing life.
Note the use of the pump:
Take a sample in your application in the trial.
To monitor the pump service life, to Shijiazhuang concrete pump pipe fittings beam in the work cycle, check whether there is the phenomenon of fatigue (micro pump leakage, abrasion and so on).
Make a schedule of maintenance and replacement, to avoid pump failure.
The pump service life chart described in 21 degrees Celsius (70 degrees Fahrenheit) temperature and 0 bar (0 psi) under pressure in different motor speed continuous pump water pump tubing life (in hours). This data is the result of years of testing for the MASTERFLEX peristaltic pump. To determine the MASTERFLEX pump life is the pump failure time based on, or pump to reduce the amount of 50% of the time, whichever is the first.
The pump is a new product of construction engineering accessories with concrete pump and at the same time, it improves the efficiency of construction, the past, the need to use artificial or a bucket or a bucket crane operation mode to fast will be delivered to the need to place concrete pouring, the efficiency of construction increased nearly a hundred times.
We have the following in the pump problem, to answer some questions.
How to prevent concrete pump pipe plugging?
1. in the replacement of the tube, to prevent pipe blockage, the pressure can be appropriate to add 2-3MPa pump; transport 3000-4000 cubic meters, the pressure recovery normal.
2. when transporting the concrete of crushed stone products, the first 3000 parties do not fill out the material full of material, so that the material in the pipe does not exceed 40%.
3. during the waiting period, a few more empty car pumps can be used to prevent pipe plugging.
4. after the completion of the work, the product concrete in the pipeline should be exported, then the pipe is washed, the sponge ball is carefully washed to avoid the formation of clogging.
What should be done after the pipe is blocked?
When 1. pipes are blocked, it is not suitable to strike the pipe with force. The reverse operation method can be used to exclude the pipe blockage. When the pipe is invalid, the pipe should be removed and cleaned.
2. if conditions are available, it is suggested that the whole set of pipes be connected to another arm type pump car to dredge them. If the conditions are not met, the detachable arm 90 degree elbow, hit 3M straight, blocking out the concrete pump pipe products.
I believe we do these to prolong the service life of the pump after there is some help, you may wish to try.
- Close This Page
- Recommendation：
- Browse：
