Users need to pay attention to the following points when choosing a sanitary stainless steel drink pump.
1, we should purchase the flow and lift of the pump and the temperature range of the use of the pump to meet the basic requirements of the medium during the production.
2, the procurement requirements of stainless steel beverage pump must have corrosion resistance performance indicators. If it is clear that the stainless steel can not transport media, it is prohibited to purchase.
(1) if the conveying medium is flammable, explosive and volatile, we recommend that stainless steel self sucking magnetic beverage pump or stainless steel self sucking shielding beverage pump and self-control self suction pump have better effect, because the products of such stainless steel beverage pump are not sealed.
(2) if the medium is food grade, it must be made of stainless steel welded body and pickled, and the whole over-current parts must also be stainless steel.
(3) if the production process contains a large number of solid particles, the technical requirement of stainless steel beverage pump is that the whole over-current parts must be wear resistant, and the motor speed is low speed motor.
3. The requirement for the purchase of the drink pump also needs to meet the installation requirements of the site.
(1) if the stainless steel beverage pump is used in a corrosive gas environment, the pump body and the motor must be protected against atmospheric corrosion.
(2). If used in the low temperature environment, the need to take into account the pump will not be Donglie, must use insulation measures or the production of the self sucking pump with low temperature resistant materials.
(3) if the flammable and explosive medium is conveyed, all kinds of motor with explosion-proof performance should be used according to the explosion-proof grade of the explosion area.
(4). The actual continuous operation of the stainless steel beverage pump should not be less than 9000 hours, equivalent to about 1 years.
(5). The design and service life of the stainless steel beverage pump requires a minimum of 10 years.
(6). The design and production of the pump and the quality control must conform to the standards and specifications of the state or related industries.
(7) when choosing a stainless steel drink pump, many factors such as pump performance, energy consumption, pump quality and cost should be taken into consideration.
- Close This Page
- Recommendation：
- Browse：
